|
M-FR3A-MGTAA Ford Performance 2005-2014 Mustang GT Coupe Assembled Adjustable FR3 Handling Pack
|
|
M-FR3A-MGTA Ford Performance 2005-2014 Mustang GT Coupe Assembled Handling Pack
|
|
|
|
|
|
- Fits 2005-2014 Mustang GT Coupe.
-
All components are designed to work together as a package
-
Lowers car approximately 1.0 Inch.
-
Includes:
-
Ford Performance Assembled adjustable Front Struts M-18000-C with adjustable rear shocks
- Ford Performace 1 Inch Lowering Springs M-5300-P
- Ford Performance Upgraded Strut Mount M-18183-C
- Ford Performance Jounce Bumpers M-5570-A
- Ford Performance Adjustable Sway Bar Kit M-5490-A
- Ford Performance Adjustable Rear Panhard Bar M-4264-A
- Includes all factory required one-time use fasteners and camber adjustment bolts for re-alignment
- Note: Some factory fasteners are one time use. Please reference service manual for reuse information and correct torque specifications. Requires alignment after installation.
|
- Fits: 2005-2014 Mustang GT Coupe.
- All components are designed to work together as a package
- Lowers car approximately 1.0 Inch
- Handling Pack Includes:
Ford Performance Assembled Front Struts M-18000-A with Ford Performance rear shocks. Struts and Shocks are non-adjustable. Use the M-FR3A-MGTAA handling pack if adjustable struts and shocks are desired.- Ford Performance 1 Inch Lowering Springs M-5300-P
- Ford Performance Upgraded Strut Mount M-18183-C
- Ford Performance Jounce Bumper Kit M-5570-A.
- Ford Performance Adjustable Sway Bar Kit M-5490-A
- Ford Performance Adjustable Rear Panhard Bar M-4264-A
Includes all factory required one-time use fasteners and camber adjustment bolts - Note: Some factory fasteners are one time use. Please reference service manual for reuse information and correct torque specifications. Requires alignment after installation.
|
|
|
|
Ford Racing 2005-2014 Mustang Coupe Damper Kit -- M-18000-A
|
|
2005-2013 MUSTANG TUBULAR LOWER CONTROL ARM KIT -- M-5649-S
|
Usually Ships in 24 Hours
Our Price:$835.00
|
|
|
List Price:$535.95 Our Price:$479.95 You save $56.00!
|
|
|
|
|
- Engineered specifically for improved handing on the 2005-2014 Mustang coupe
- Dynamic Suspension dampers, same manufacturer as Mustang FR500C race car
- Unique Ford Racing performance tune
- Standard equipment on the Shelby GT and Shelby GT-H
- Designed specifically for lowered vehicles
- 2005-2010 Mustang GT coupe owners: Use with M-5300-K or M-5300-P and M-5490-A for optimum performance
- 2005-2010 Mustang V6 coupe owners: Use with M-5300-N and M-5490-C for optimum performance
- 2011-2014 Mustang GT coupe owners: Must use with M-5300-K or M-5300-P lowering
springs, M-18183-C upper strut mounts, and M-5570-A jounce stops.
M-5490-A roll bars are recommended for optimum performance. - 2011-2012 Mustang V6 coupe owners: Must use with M-5300-N lowering
springs, M-18183-C upper strut mounts, and M-5570-A jounce stops.
M-5490-C roll bars are recommended for optimum performance. - Note: Some factory fasteners are one time use. Please reference a Ford service manual for reuse information and correct torque specifications.
|
Service replacement part for 2012 Mustang Boss 302S Race Car - Fits 2005-2014 Mustang GT and 2007-2014 Shelby GT500
- Made from steel tube with high strength spherical rod ends.
- Increased stiffness for minimal suspension deflection
- Non-adjustable
- Off-road use only
- Great for use with rear control arm relocation kit M-5650-A
|
|
|
|
Ford Racing 2005-2014 Mustang GT Coupe Sway Bar Kit -- M-5490-A
|
|
Shelby GT500 Lower Control Arm Kit -- M-3075-E
|
List Price:$477.00 Our Price:$443.00 You save $34.00!
|
|
|
|
|
|
- Sway bar kit designed for increased handling and performance on 2005-2014 Mustang GT coupe
- Best when used with M-18000-A or M-18000-C struts/shocks and M-5300-P springs (1.0 inch Drop)
- Includes all mounting hardware
- Note:Some factory fasteners are one time use. Please reference a Ford service manual for reuse information and correct torque specifications.
- For replacement bushings use bushing kit M-5490-BKA
|
- Fits 2005-2010 Mustang GT built on or before 8/3/09 with 18mm ball joint shaft
- Original equipment on 2007-2009 Shelby GT500
- Increased strength ball joints
- Kit contains 1 RH and 1 LH lower control arm assembly
- NOTE:Some factory fasteners are one time use. Please reference a
Ford service manual for reuse information and correct torque
specifications.
|
|
|
|
FORD RACING 2005-2014 MUSTANG ADJUSTABLE PANHARD BAR -- M-4264-A
|
|
2005-2014 MUSTANG LOWER CONTROL ARM RELOCATION BRACKET -- M-5650-A
|
|
|
|
|
|
- Fits 2005-2014 Mustang V6/GT/Boss 302 and 2007-2014 Shelby GT500.
- Allows adjustment to the rear suspension vs the factory non-adjustable bar. Especially useful when using our FR3 handling packs that lower the vehicle.
- 1.125" OD x.095 wall thickness 4130 chrome moly bar for increased rigidity more predictable handling
- Low deflection urethane rod ends and steel sleeves offer decreased flex for tighter handling and less wear
- Unique offset mounts allows the panhard bar to clear rear differential cove
- Service replacement part for the FR500S and BOSS302 R1 race car
- Also for use on NASA AI and AIX class S197 Mustangs
|
- Fits 2005-2014 Mustang GT and 2007-2013 Shelby GT500
- Bracket allows adjustemnt of rear lower control arm mounting point at axle
- Allows adjustment of instant center for optimium traction
- A must have for reducing wheel-hop
- Will not fit stock Mustang GT OR Shelby GT500 lower control arms.
- Requires aftermarket lower control arms like Ford Racing M-5649-R1
|
|
|
|
Mustang FR500C Rear Lower Control Arms -- M-5649-R1
|
|
Ford Racing 2005-2014 Mustang GT Coupe 1 Inch Lowering Springs -- M-5300-P
|
|
|
|
|
|
- Service replacement for the Mustang FR500C and Boss 302R race car
- Fits all 2005-2014 Mustang V-6, GT, Shelby GT-500 and 2012-2013 Boss 302
- Features low deflection urethane bushings and tubular steel construction.
- Increased stiffness for mininal suspension deflection
- The kit comes complete with bushings and sleeves and can be installed with basic shop tools.
- Great for use with rear control arm relocation kit M-5650-A
- Replacement urethane bushing/sleeve kit available M-5638-A
- For street applications see SVT control arm kit M-5538-A
- For tubular control arms with spherical bearing ends see control arm kit M-5649-S
|
- Progressive rate spring, designed for increased handling and performance
- Lowers 2005-2014 Mustang GT coupe approximately 1.5" (2011-2014 Mustangs require M-18000-A Damper Kit, M-5570-A Jounce Bumper Kit, and M-18183-C SVT Strut Mounts with these springs)
- Standard equipment on Shelby GT and Shelby GT-H
- Use with M-18000-A and M-5490-A for optimum performance
- Note: Some factory fasteners are one time use. Please reference a Ford service manual for reuse information and correct torque specifications.
|
|
|
|
REPLACEMENT MUSTANG GT SUSPENSION HARDWARE KIT FOR FR3 HANDLING PACKS -- M-5490-HWA
|
|
Ford Racing 2005-2014 Mustang GT Strut Tower Brace -- M-20201-S197
|
Usually Ships in 24 Hours
Our Price:$190.00
|
|
|
List Price:$212.00 Our Price:$185.00 You save $27.00!
|
|
|
|
|
This hardware kit was developed in response to customers that needed replacement clamps, bolt1412 Ford Mustang GT. The individual pieces in this kit are not offered for sale. This hardware kit is your least expensive option to buy replacement front sway bar clamps, bolts, and links. If you just need the urethane bushings or rear sway bar links and do not need the front sway bar clamps or bolts, then we also sell a separately in a urethane bushing kit or individual rear sway bar links.
THIS IS NOT DESIGNED TO BE USED WITH THE STOCK MUSTANG GT SUSPENSION.
- FITS 2005-2014 FORD RACING MUSTANG GT ROLL BAR KIT M-5490-A
- FITS 2005-2014 FORD RACING MUSTANG GT HANDLING PACKAGE M-2005-FR3 AND M-FR3-MGT.
- FITS SHELBY GT AND SHELBY GT-H MUSTANGS
|
- Fits 2005-2010 Mustang GT without Engine Dress-Up Cover.
- Fits 2011-2014 Mustang GT with Engine Dress-Up Cover
- Parallel beam design for added rigidity
- Black powder coated
- Stainless steel Ford Racing emblem
- Strut Tower Brace does not fit V-6, supercharged GT, optional intake shroud, BOSS 302 or Ford Racing Intake Manifolds.
- Will clear 2011+ 5.0L Coyote engine cover in 2011+ Mustang GT vehicles.
- Note: Some factory fasteners are one time use. Please reference a Ford service manual for reuse information and correct torque specifications.
|
|
|
|
2005-2014 Mustang Front Strut Mount Upgrade Pair -- M-18183-C
|
|
2005-2014 MUSTANG REAR LOWER CONTROL ARM UPGRADE KIT-- M-5538-A
|
|
|
|
|
|
- Fits 2005-2010 Mustang GT and V6
- Fits 2011-2014 Mustang GT and V6 when used with Ford Racing lowering springs and dampers.
- Fits 2007-2014 Shelby GT500
- Original equipment on the 2011-2012 Shelby GT500 with SVT Track Pack Option
- Will fit 2011-2014 Mustang V6 when used with Ford Racing Dampers M-18000-A or M-18000-C and M-5300-N springs
- Will fit 2011-2014 Mustang GT when used with Ford Racing Dampers M-18000-A or M-18000-C and M-5300-K or M-5300-P springs.
- Increased durometer over base strut mount
- Eliminate the popping/clunking
noise often associated with lowered Mustang's with these upgraded
strut mounts from Ford Racing.
|
- Fits 2005-2011 Mustang GT, 2005-2014 Mustang GT with auto transmission, and 2005-2014 Mustang V6
- Standard equipment on 2007-2014 Shelby GT500, 2013-2014 Mustang GT with Track Pack, and 2011-2014 Mustang GT with manual transmission
- Increased bushing durometer and stiffness for high performance applications
- For race applications see tubular control arm kits M-5649-S or M-5649-R1
NOTE:some factory fasteners are one time use. Please reference
service manual for reuse information and correct torque specifications.
|
|
|
|
REPLACEMENT MUSTANG GT SUSPENSION STABILIZER BAR LINK FOR FR3 HANDLING PACKS -- M-5490-LINKA
|
|
REPLACEMENT MUSTANG GT SUSPENSION URETHANE BUSHING KIT FOR FR3 HANDLING PACKS -- M-5490-BKA
|
|
|
|
|
|
This stabilizer bar link was developed in response to customers that needed replacement parts for the Ford Racing Roll Bars of the 2005-2012 Ford Mustang GT. The individual pieces in this kit are not offered for sale. This kit is your least expensive option to buy a replacement stabilizer bar link for your Ford Racing FR3 handling pack in your Mustang GT. This link includes the bushing.
THIS IS NOT DESIGNED TO BE USED WITH THE STOCK MUSTANG GT SUSPENSION.
- FITS 2005-2012 FORD RACING MUSTANG GT ROLL BAR KIT M-5490-A
- FITS 2005-2012 FORD RACING MUSTANG GT HANDLING PACKAGE M-2005-FR3 AND M-FR3-MGT.
- FITS SHELBY GT AND SHELBY GT-H MUSTANGS
|
This urethane bushing kit was developed in response to customers that needed replacement parts for the Ford Racing Roll Bars of the 2005-2012 Ford Mustang GT. The individual pieces in this kit are not offered for sale. This kit is your least expensive option to buy replacement bushings. If you need the clamps or bolts, then we also sell a hardware kit that also includes the same urethane bushings.
THIS IS NOT DESIGNED TO BE USED WITH THE STOCK MUSTANG GT SUSPENSION.
- FITS 2005-2012 FORD RACING MUSTANG GT ROLL BAR KIT M-5490-A
- FITS 2005-2012 FORD RACING MUSTANG GT HANDLING PACKAGE M-2005-FR3 AND M-FR3-MGT.
- FITS SHELBY GT AND SHELBY GT-H MUSTANGS
|
|
|
|
Ford Racing 2005-2014 Mustang Jounce Bumper Kit -- M-5570-A
|
|
|
|
|
|
-
Unique jounce bumpers designed for improved stability/ride comfort when used in conjunction with FRPP lowering springs
-
Fits 2005-2014 Mustang V6, GT and 2007-2011 Shelby GT500, original equipment on 2012-2014 Shelby GT500
-
Unique design
-
Recommended for lowered vehicles
-
Includes front and rear jounce bumpers.
|
|
|
