- Fits 2011-2014 Mustang GT
- Aluminized 409 stainless steel corrosion-resistant body with polished 304 stainless 4" diameter tips
- Standard on 2011-2012 Shelby GT500
- Throatier exhaust note
- 50 state drive-by noise legal
- The best 2011-2012 Mustang exhaust value. Great sound and no drone.
- OEM direct bolt-on.
- Backed by Ford Racing warranty.
- SPECIFICALLY DOES NOT NULLIFY THE EXISTING NEW VEHICLE WARRANTY.
Muffler Installation Notes:
Install time takes less than an hour with common wrench and ratchet/socket set. The trick to installing any axle-back muffler setup on these cars is to unbolt the hangers from the car and remove the stock mufflers with the hanger brackets still on the muffler. Then you transfer the hanger brackets to the corresponding mounts on the new muffler and install/re-fasten the hangers and muffler back to the frame. Then repeat the process on the muffler on the other side of the car. Finally, you will fasten the mufflers to the respective axle pipes using the supplied clamps. These are OEM mufflers so the fitment and weld quality are accurate and strong.
If you try to remove/replace the mufflers by sliding/prying the mounts out of the hanger brackets, you will bend and damage the mufflers mounts. The hanger brackets are purposely setup in a way that the muffler mounts cannot easily work themselves free from the hanger brackets on the car so don't try this method.