Centerforce 2011-2014 Mustang GT/Boss 302 11 Inch 23 Spline Dual Friction Clutch Kit -- DF023500

This item fits:

• 2011-2014 Mustang GT/Boss 302 5.0L with MT-82 Transmission (Must use Ford Racing Flywheel M-6375-G46A or M-6375-R00A or equivalent flywheel with 18 bolt clutch bolt pattern)

The Centerforce Dual Friction Clutch Series is a performance matched pressure plate & disc combination featuring the patented Centerforce centrifugal weight system (where applicable) and specialized machining processes to provide a performance clutch that offers exceptional street characteristics, while offering outstanding holding-capacity and durability. Furthermore, the Centerforce Dual Friction disc has a full facing on the pressure plate side for drivability and longevity, while a carbon composite puc-style (segmented) facing is used on the flywheel side for a positive engagement and increased holding-capacity.

The Dual Friction clutch is engineered for those who are looking for the ultimate in street/strip holding power and performance without sacrificing pedal effort and driver control. While the Dual Friction has been engineered primarily as a street clutch it can be used in mild competition applications.

• Light pedal effort
• Patented centrifugal weight system to increase clamping load as RPM increases. The increased clamping effect allows a clutch disc to be used with light pedal effort but at the same time increasing the power capacity of the clutch.
• Patented ball bearing pressure plate surfaces eliminates internal friction on the pivot point of the pressure plate which reduces the "heavy clutch feel" and creates a smoother engagement.
• Patented Dual Friction Design increases the clamp load and holding capacity while reducing pedal effort.
• High Quality Friction Material
• Increased Holding Capacity Rated to 600 ft-lbs. of Torque (anything over 600 ft-lbs. should use the DYAD twin disc setup)
• Smooth Engagement
• Assembly is precision balanced to OEM specifications
• Designed, Engineered, and Manufactured in the USA

Part Number	DF023500
Input Shaft Spline (Inches)	1"- 23 spline
Size Inches	11
Clutch Bolt Pattern	18
Included In Package	Pressure Plate, Disc, Bolts, Dowel Pins, Bleed Kit, Alignment tool.

Centerforce recommends changing your pilot bearing and throwout bearing when replacing the clutch disc. Given the relatively low cost of the bearings themselves and the amount of labor to access the clutch for removal, it makes sense to change those bearings while you have access to them.

Warranty: Centerforce warrants its products to be free from defects in material and workmanship for 90 days from the date of purchase. Centerforce reserves the right to examine all parts returned for warranty claim to determine whether or not any such part has failed because of a defect in material or workmanship. This warranty shall be limited to repairing, replacing, or crediting, at the manufacturer's option, any part found to be defective.

* Image Disclaimer: While we make every effort to use actual product images where possible, product images provided on this website are for illustration only, and may not reflect the actual product.