Ford Performance 7.3L Godzilla Engine and 10R140 Automatic Control Pack

M-6017-73A

• Designed to run the 2020+ Super Duty 7.3L gas engine M-6007-73 with the 2020+ Super Duty 10R140 automatic transmission.
• PCM with Ford Performance calibration
• Electronic Throttle Control accelerator pedal, eliminating throttle cable routing problems
• Unique control pack harness, which replaces the stock body harness and is designed for custom vehicle builds
• OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis
• Power distribution module
• Mustang GT Air box
• Mustang GT Air inlet tube
• 87mm Mustang Bullitt throttle body M-9926-M50B w/M-9474-M5087 adaptor
• MAF sensor (Mass Air Flow Sensor)
• Upstream O2 sensors(primary oxygen sensors only)
• For projects cars not using the included air box and air intake tube, the PCM must be re-calibrated by an aftermarket dyno tuner to run properly. Custom air induction setups will throw off the PCM calibration provided which is why you need a custom dyno tune.
• For projects locating the HEGO oxygen sensors in locations different from the production mustang locations, the PCM will need to be re-calibrated by an aftermarket dyno tuner to run proplery.
• PCM with Ford Performance calibration requires return type fuel system, will not work with returnless fuel system
• NOTE: Installation of PCM in a production vehicle will result in a 'No Start' situation.
• This installation setup does not include provisions for: Cruise Control, A/C, ABS, Electronic Traction Control, or OEM Anti-Theft Systems.