- Cat Back Exhuast System
- Fits 2011-2014 Mustang GT and 2011-2012 GT500
- 3-inch Cat back exhaust system delivers very aggressive exhaust note not for the faint of heart
- Includes X-pipe for improved flow
- 4.5-inch exhaust tip features embossed Ford Racing logo
- 49 state legal mufflers
Muffler Installation Notes:
Install time takes less than an
hour with common wrench and ratchet/socket set. The trick to installing
any axle-back muffler setup on these cars is to unbolt the hangers from
the car and remove the stock mufflers with the hanger brackets still on
the muffler. Then you transfer the hanger brackets to the
corresponding mounts on the new muffler and install/re-fasten the
hangers and muffler back to the frame. Then repeat the process on the
muffler on the other side of the car. Finally, you will fasten the
mufflers to the respective axle pipes using the supplied clamps. These
are OEM mufflers so the fitment and weld quality are accurate and
strong.
If you try to remove/replace the mufflers by
sliding/prying the mounts out of the hanger brackets, you will bend and
damage the mufflers mounts. The hanger brackets are purposely setup in
way that the muffler mounts cannot easily work themselves free from the
hanger brackets on the car so don't try this method.