|
FORD RACING HIGH-PERFORMANCE OIL FILTER (single filter)
|
|
FORD RACING FENDER COVER -- M-1822-A2
|
|
|
|
|
|
- Upgraded Direct Replacement for Motorcraft FL-820S oil filter.
So any application that uses a Motorcraft FL-820S oil filter can benefit
from using this upgraded oil filter. - Synthetic-Polymer/Cellulose-Fiber blend media
- Heavy-gauge base and canister for higher burst strength and impulse fatigue resistance
- High-quality silicone anti-drain back valve
- Non-stick sealing gasket for ease of installation and removal
- Long life with standard and synthetic motor oils
- Up to 50% more filtering capacity than standard filters
- Improved filtering efficiency
- This technology is only available through Ford Racing Performance Parts
- Click Here for a Complete Vehicle Application Fitment List
|
Protect that beautiful paint job from scratches, chemicals and oil with this strong, sturdy and slip-resistant "Ford Racing" fender cover. Measures 27'' x 36'' and is acid and grease resistant. Features handy "ridged" area in which to place small tools and parts.
|
|
|
|
2005-2014 MUSTANG HOOD LIFT KIT W/ LASER ENGRAVED FORD PERFORMANCE LOGO -- M-16826-M
|
|
FORD RACING HIGH-PERFORMANCE OIL FILTER (case of 12) -- M-6731-FL820
|
List Price:$99.00 Our Price:$82.00
Sold as a Set You save $17.00!
(1)
|
|
|
Our Price:$179.00
Sold in a case of 12
|
|
|
|
|
- Fits 2005-2014 Mustangs Ford Performance Hood Lift Kit w/ Laser Engraved Ford Performance Logo.
- 90 LBS Rating
- Designed for all OEM base, Mustang GT, GT500, GT350, and many aftermarket hoods
- These hood lifts utilize two gas struts that lift and hold the hood without the need for a prop-rod.
- Made from lightweight steel and aluminum, they feature a durable black power coated finish to give your engine bay a much cleaner appearance.
- Includes the necessary mounting brackets
- No Drilling Required. The stamped steel brackets included in this kit are designed to bolt into the existing mounting holes in the hood so there is no drilling required for installation
- If your aftermarket hood is lighter than the factory hood, use caution when opening the hood due to the power of the strut.
|
- Upgraded Direct Replacement for Motorcraft FL-820S oil filter.
So any application that uses a Motorcraft FL-820S oil filter can benefit
from using this upgraded oil filter. - Synthetic-Polymer/Cellulose-Fiber blend media
- Heavy-gauge base and canister for higher burst strength and impulse fatigue resistance
- High-quality silicone anti-drain back valve
- Non-stick sealing gasket for ease of installation and removal
- Long life with standard and synthetic motor oils
- Up to 50% more filtering capacity than standard filters
- Improved filtering efficiency
- This technology is only available through Ford Racing Performance Parts
- Click Here for a Complete Vehicle Application Fitment List
|
|
|
|
24 LB/HR FUEL INJECTOR SET -- M-9593-LU24A
|
|
80 LB/HR FUEL INJECTOR SET -- M-9593-LU80
|
List Price:$319.00 Our Price:$249.00
Sold in Sets of 8 You save $70.00!
(1)
|
|
|
|
|
|
- 24 lbs/hr, 6-hole, high-impedance fuel injector with USCAR electrical connector.
- Latest technology injector design for optimum performance.
- Check your current injectors or harness to determine the correct style connector. If it is not the right connector we have a really nice adapter kit to convert the connector of this injector (USCAR) to a Jetronic/Minitimer style connector.
- Need help determining which injector you require for your application? Refer to EFI Tech Tips
- If these injectors are a different size
(lbs/hr. flow rate) than the ones currently installed on your vehicle, then you will need recalibrate either your Mass Air
Flow sensor or PCM tune for proper performance.
|
- 80 lbs/hr, single hole, high-impedance fuel injector with USCAR electrical connector.
- Latest technology injector design for optimum performance.
- Original Equipment on the winning Cobra Jet race cars
- Check your current injectors or harness to determine the correct style connector. If it is not the right connector we have a really nice adapter kit to convert the connector of this injector (USCAR) to a Jetronic/Minitimer style connector.
- Need help determining which injector you require for your application? Refer to EFI Tech Tips
- If these injectors are a different size
(lbs/hr. flow rate) than the ones currently installed on your vehicle, then you will need recalibrate either your Mass Air
Flow sensor or PCM tune for proper performance.
|
|
|
|
60 LB/HR FUEL INJECTOR SET -- M-9593-LU60
|
|
|
|
|
|
- 60 lbs/hr, 4-hole, high-impedance fuel injector with USCAR electrical connector.
- Latest technology injector design for optimum performance.
- Check your current injectors or harness to determine the correct style connector. If it is not the right connector we have a really nice adapter kit to convert the connector of this injector (USCAR) to a Jetronic/Minitimer style connector.
- Need help determining which injector you require for your application? Refer to EFI Tech Tips
- If these injectors are a different size
(lbs/hr. flow rate) than the ones currently installed on your vehicle, then you will need recalibrate either your Mass Air
Flow sensor or PCM tune for proper performance.
|
|
|
