|
FORD RACING HIGH-PERFORMANCE OIL FILTER (single filter)
|
|
FORD RACING FENDER COVER -- M-1822-A2
|
|
|
|
|
|
- Upgraded Direct Replacement for Motorcraft FL-820S oil filter.
So any application that uses a Motorcraft FL-820S oil filter can benefit
from using this upgraded oil filter. - Synthetic-Polymer/Cellulose-Fiber blend media
- Heavy-gauge base and canister for higher burst strength and impulse fatigue resistance
- High-quality silicone anti-drain back valve
- Non-stick sealing gasket for ease of installation and removal
- Long life with standard and synthetic motor oils
- Up to 50% more filtering capacity than standard filters
- Improved filtering efficiency
- This technology is only available through Ford Racing Performance Parts
- Click Here for a Complete Vehicle Application Fitment List
|
Protect that beautiful paint job from scratches, chemicals and oil with this strong, sturdy and slip-resistant "Ford Racing" fender cover. Measures 27'' x 36'' and is acid and grease resistant. Features handy "ridged" area in which to place small tools and parts.
|
|
|
|
M-9601-G 2010-2017 SHELBY GT350/GT500 HIGH FLOW WASHABLE DRY REPLACEMENT BLUE CONE FILTER
|
|
2005-2014 MUSTANG HOOD LIFT KIT W/ LASER ENGRAVED FORD PERFORMANCE LOGO -- M-16826-M
|
List Price:$94.00 Our Price:$80.00 You save $14.00!
(3)
|
|
|
List Price:$99.00 Our Price:$82.00
Sold as a Set You save $17.00!
(1)
|
|
|
|
|
Airaid is proud to release a new OEM direct replacement filter for the 2010-2017 5.2L/5.4L/5.8L Mustang Shelby GT350/GT500. Don't settle for a Universal fit cone filter, when the Airaid has been fully engineered and designed to the OEM specification. The Airaid premium filter offers an excellent combination of airflow and filtration and is fully serviceable making it the last air filter you will need to buy! Don't spend your hard earned money on over-priced disposable filters from the dealer. This filter is fully serviceable and comes with a "No-Hassle" lifetime warranty against any defects.
- Hand Poured Urethane Body Won't crack, shrink, or curl like rubber or Plastisol
- Airaid's exclusive unique dry filtration technology enables the filter to filtrate far superior to the average cotton filter
- The last air filter you will need to buy! Dry filter technology is easily cleaned with common household detergents and water.
- 6.76 Rear Wheel HP increase as measured on Airaid's in-ground chassis dyno.
- Proudly Made in the USA with a "No-Hassle" Warranty.
|
- Fits 2005-2014 Mustangs Ford Performance Hood Lift Kit w/ Laser Engraved Ford Performance Logo.
- 90 LBS Rating
- Designed for all OEM base, Mustang GT, GT500, GT350, and many aftermarket hoods
- These hood lifts utilize two gas struts that lift and hold the hood without the need for a prop-rod.
- Made from lightweight steel and aluminum, they feature a durable black power coated finish to give your engine bay a much cleaner appearance.
- Includes the necessary mounting brackets
- No Drilling Required. The stamped steel brackets included in this kit are designed to bolt into the existing mounting holes in the hood so there is no drilling required for installation
- If your aftermarket hood is lighter than the factory hood, use caution when opening the hood due to the power of the strut.
|
|
|
|
2007-2014 Shelby GT500 Powered By SVT Coil Covers -- M-6067-C
|
|
2007-2014 MUSTANG SHELBY GT500 THROTTLE BODY -- M-9926-MSVT
|
|
|
|
|
|
2007-2014 Shelby GT500 Powered By SVT Coil Covers
M-6067-C
- Original equipment on the 2007-2014 Shelby GT500
- Fits most 4.6L/5.4L/5.8L DOHC engines with coil on plug ignition
|
- Fits 2007-2014 Mustang Shelby GT500
- New stock replacement 60mm throttle body
|
|
|
|
FORD GT 5.4L LASH ADJUSTER SET -- M-6500-GT
|
|
2005-2014 MUSTANG PERFORMANCE COOLING FAN -- M-8C607-MSVT
|
|
|
|
|
|
- Unique lash adjusters fit Ford GT and Mustang GT500 5.4L/5.8L DOHC cylinder heads
- Includes 16 intake and 16 exhaust lash adjusters
|
- Fits: 2005-2014 Mustang GT and 2007-2014 Mustang Shelby GT500
- Original equipment cooling fan on 2013-2014 Mustang Shelby GT500
- Added cooling capacity for performance applications
|
|
|
|
HIGH-TORQUE MINI STARTER - MODULAR ENGINES -- M-11000-C50
|
|
5.4L/5.8L 4V SVT CAMSHAFT DRIVE KIT -- M-6004-54SVT
|
|
|
List Price:$575.00 Our Price:$590.00
|
|
|
|
|
- Fits Modular 4.6L, 5.0L TiVCT, 5.4L and 5.8L Engines with RWD and automatic and manual transmissions
- Compact construction, great for header clearance
- Weighs approximately 6 lbs.
- Comes with starter cables and fasteners.
- Must
use diode protected fenderwell solenoid when used in non-production
applications. (call techline 800-367-3788 for more details)
|
Camshaft drive kit for the SVT 5.4L/5.8L 4 valve engine with an aluminum
or cast Iron block. Includes reduced diameter cam drive that came on 07
and newer SVT Mustang. - Fits: 2007-2014 5.4L/5.8L 4V Shelby GT500
- Includes reduced diameter camshaft sprockets used on Shelby GT500.
Kit includes new production: - Tensioner arms
- Chain guides
- Front cover gaskets and front main seal
- Primary and secondary timing chains
- Durable cast iron primary and secondary timing chain tensioners
- Camshaft sprockets, spacers, bolts and washers
- Crankshaft sprocket and diamond coated washer
- Crank position trigger wheel
- Includes fasteners
|
|
|
|
M-9926-CJ65 Ford Racing Shelby GT500 Cobra Jet Twin Bore 65mm Billet Throttle Body
|
|
|
List Price:$850.00 Our Price:$770.00 You save $80.00!
|
|
|
|
- FLOW RATING: 1517 CFM (28-inches of water, measured on SuperFlow SF-1020 Flow Bench)
- Service replacement for the 2008 Mustang FR500CJ race car
- Service replacement for the 2008 Mustang FR500CJ race car
- Fits in factory location on 2007-2012 Shelby GT500 Mustang
- Fits 2011-2012 Mustang GT with Ford Racing Supercharger kit
- Twin 65mm bore (stock Shelby GT500 is twin 60mm)
- Precision machined from billet aluminum to ensure consistency
- Polished finish with machined Ford Racing logo
- Tested to Ford original equipment specifications for cold and hot weather
- Fully assembled, complete with throttle position sensor and actuator motor, ready to bolt on!
- Uses OE gears to prevent gear bind and wear common with other aftermarket throttle bodies
- Does not include calibration, custom calibration required.
|
|
|
